fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
fuga mobilya
Tensile tester for yarn and fabric
Home RESEARCH Equipment

Tensile tester for yarn and fabric

 

Name of equipment:

Tensile tester for yarn and fabric

Purpose:

The STATIMAT M tensile tester is used to test tensile strength and elongation of yarn.

Model, type, country of origin:

Statimat M – Textechno, Germany

 

Technical characte-ristics:

The main part of the tester is a microprocessor system by means of which test conditions are adjusted, the test course controlled and the results obtained are evaluated statistically.

The speed is adjustable from 3 to 10 000 mm/min.

Maximum clam distance is 900 mm.

Force measuring device: F 10 N, F 100 N, F 1 000 N.

Suction system.

Year of origin:  -                   

Figure:

 

 

Method of
work:

The tensile tester is fully automated, microprocessor controlled and operates on the principle of constant elongation speed (so-called CRE method). The testing is done using two pneumatically activated clamps; the upper clamp is static, and the lower one is fixed on the elongation sliding device. The lower clamp grips the yarn , puts it on the upper clamp and slides away from it to the defined distance. Afterwards, the lower clamp continues to stretch the yarn until its breakage which should occur within the defined period of time. The tester is connected to the computer containing the program to set up test parameters, complete data processing and graphical representation of data.

Department,
room, location:

Department of Textile Design and Management

Laboratory, B-008 Prilaz baruna Filipovića 28a

Addition note:  

The corresponding standards:

HRN ISO 2062:2003, Textiles – Yarns from packages – Determination of single-end breaking force and elongation at break

ISO 13934, Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method

DIN 53834, Textilien – Einfacher Zugversuch an Garnen und Zwirnen

DIN 51221

 
r1
TTF
r3
T-POT
r5
FP-7
r3
STEP
r8
Who's Online
We have 21 guests online